2003 Mercedes SL-Class Owner's Manual - Page 209

Controls in detail Useful features Warning! G i For operation in the USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user's authority to operate the equipment. Programming or reprogramming the integrated remote control Turn key in starter switch to position 2. Hold the end of the hand-held transmitter of the device you wish to train approximately 2 to 5 inches (5 cm to 12 cm) away from the surface of the in- When programming a garage door opener, the door moves up or down. When programming or operating the remote control, make sure there is no possibility of anyone being injured by the moving door. tegrated remote control located on the inside rear view mirror, keeping the indicator lamp in view. Using both hands, simultaneously press the hand-held transmitter button and the desired integrated remote control button. Do not release the buttons. The indicator lamp on the integrated remote control will flash, first slowly and then rapidly. The rapid flashing lamp indicates successful programming of the new frequency signal. When the indicator lamp flashes rapidly, release both buttons. To program the remaining two buttons, repeat the steps. i Certain types of garage door openers are incompatible with the integrated opener. If you should experience difficulties with programming the transmitter, contact your authorized Mercedes-Benz Center, or call Mercedes-Benz Customer Assistance Center (in the USA only) at 1-800-FOR-MERCedes, or Customer Service (in Canada) at 1-800-387-0100. i If, after repeated attempts, you do not successfully program the integrated remote control device to learn the signal of the hand-held transmitter, the garage door opener could be equipped with the "rolling code feature". 209