2003 Mercedes SL-Class Owner's Manual - Page 318
2003 Mercedes SL-Class Manual
Page 318 highlights
Practical hints Flat tire Lowering the vehicle Lower vehicle by turning crank counterclockwise until the full weight of the vehicle is resting on the ground. Pull the jack out of the jack support tube. Replacing jack support tube cover Slide tongue of cover under the upper edge of the tube opening. Applying even pressure, press cover until it snaps into place. Be careful not to damage the locking tabs or clamp the plastic retaining strap. Warning! G Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 96 ft lb (130 Nm). Before storing the jack in the trunk, crank back to storage position and fold in the arm. 1 - 5 Wheel bolts Tighten the five wheel bolts evenly, following the diagonal sequence illustrated (1 to 5), until all bolts are tight. Observe a tightening torque of 96 ft lb (130 Nm). 318
![](/manual_guide/autos/2003-mercedes-slclass-owners-manual-d55ec4b/318.png)