2004 Mercedes E-Class Owner's Manual - Page 165
2004 Mercedes E-Class Manual
Page 165 highlights
Controls in detail Automatic transmission Manual shift program E 55 AMG In the manual shift program mode you can change the gears manually ( page 162) on the steering wheel or by using the gear selector lever ( page 159). Allow engine to warm up under low load use. Do not place full load on the engine until the operating temperature has been reached. Shift into reverse gear only when the vehicle is stopped. Program mode selector switch The program mode selector switch is located on the lower part of the center console. Activating manual shift program Press program mode selector switch 1 repeatedly until the M for manual shift program appears in the multifunction display. The program mode switches to manual program mode M. Automatic shifting is switched off. The gear range is not limited. You can change the gears manually when the gear selector lever is in position D. You can upshift or downshift through the gears in succession. 1 Program mode selector switch S Sport C Comfort M Manual For standard driving For comfort driving For manual gear shifting The current gear selector lever position and the selected shift program (C/S/M) is indicated in the multifunction display ( page 129). ! Avoid spinning of a drive wheel for an extended period when driving off on slippery road surfaces. This may cause serious damage to the drive train which is not covered by the Mercedes-Benz Limited Warranty. The selected shift program (C/S/M) is indicated in the multifunction display ( page 129). 165