2005 Mercedes E-Class Owner's Manual - Page 423

Practical hints Replacing bulbs Low beam bulb (halogen headlamps only) Turn housing cover 3 counterclockwise and remove it. Pull electrical connector 7 off. Unclip the retainer spring on the bulb socket and take out the bulb. Insert the new bulb so that its base locates in the recess on the lower left and is level to it. Clip on the retainer spring. Plug electrical connector 7 onto the bulb. Align housing cover 3 and turn it clockwise. High beam bulb/high beam flasher bulb (halogen headlamps)/high beam flasher bulb (Bi-Xenon* headlamps) Turn bulb socket 1 with the bulb counterclockwise and remove it. Pull electrical connector 5 off. Press gently onto the bulb and turn counterclockwise out of bulb socket 1. Press the new bulb gently into bulb socket 1 and turn clockwise until it engages. Plug electrical connector 5 onto the bulb. Place bulb socket 1 back into the lamp and turn it clockwise. Front turn signal lamp bulb Turn bulb socket 4 with the bulb counterclockwise and remove it. Press gently onto the bulb and turn counterclockwise out of bulb socket 4. Press the new bulb gently into bulb socket 4 and turn clockwise until it engages. Place bulb socket 4 back into the lamp and turn it clockwise. Parking and standing lamp bulb Pull out bulb socket 6 with the bulb. Press gently onto the bulb and turn counterclockwise out of bulb socket 6. Press the new bulb gently into bulb socket 6 and turn clockwise until it engages. Press bulb socket 6 back into the lamp. 421