2005 Mercedes E-Class Owner's Manual - Page 66
2005 Mercedes E-Class Manual
Page 66 highlights
Safety and Security Occupant safety In case of other types of impacts and impacts below air bag deployment thresholds, air bags will not be deployed. The driver and passenger will then be protected to the extent possible by a properly fastened seat belt. A properly fastened seat belt is also needed to provide the best possible protection in a rollover. We caution you not to rely on the presence of the air bags in order to avoid wearing your seat belt. It is important to your safety and that of your passengers that you replace deployed air bags and repair any malfunctioning air bags to make sure that the vehicle will continue to provide supplemental crash protection for occupants. Safety guidelines for the seat belt, emergency tensioning device and air bag Warning! G or door frame trims, and installation of additional electrical/electronic equipment on or near SRS components and wiring. Keep area between air bags and occupants free from objects (e.g. packages, purses, umbrellas, etc.). Do not pass belts over sharp edges. They could tear. Do not make any modification that could change the effectiveness of the belts. Do not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequate protection. Do not hang items such as coat hangers from the coat hooks or handles over the door. These items may turn into projectiles and cause head and other injuries when curtain air bag is deployed. Never place your feet on the instrument panel, dashboard, or on the seat. Always keep both feet on the floor in front of the seat. Damaged seat belts or belts that were highly stressed in an accident must be replaced and their anchoring points must also be checked. Use only belts installed or supplied by an authorized Mercedes-Benz Center. Air bags and emergency tensioning devices (ETDs) are designed to function on a one-time-only basis. An air bag or ETD that was activated must be replaced. No modifications of any kind may be made to any components or wiring of the SRS. This includes changing or removing any component or part of the SRS, the installation of additional trim material, badges etc. over the steering wheel hub, passenger front air bag cover, door trim panels, 64