2006 Mercedes CLS-Class Owner's Manual - Page 321
2006 Mercedes CLS-Class Manual
Page 321 highlights
Operation Tires and wheels i Reactivate the TPMS after adjusting the tire inflation pressure to the inflation pressure recommended for the vehicle operating condition. Tire pressure should only be adjusted on cold tires. Observe the recommended tire inflation pressure on the placard on the driver's door B-pillar ( page 305). Some vehicles may have supplemental tire pressure information for driving at high speeds ( page 312) or for vehicle loads less than the maximum loaded vehicle condition. If such information is provided, it can be found on the inside of the fuel filler flap. Press button è or ÿ on the multifunction steering wheel repeatedly until the standard display menu appears in the multifunction display ( page 153). Press the j or k button repeatedly until you see the current inflation pressures for each tire appear in the multifunction display or the following message appears in the multifunction display Tire pressure displayed only after driving a few minutes Press the æ button. The following message will appear in the multifunction display: Tire pres. monitor reactivated After a few minutes driving, the current tire inflation pressure values are accepted as reference values and then monitored. If you wish to cancel activation: Press the ç button. Press the reset button ( page 25). The following message will appear in the multifunction display: Check current tire pressure? 320
![](/manual_guide/autos/2006-mercedes-clsclass-owners-manual-02c73b3/321.png)