2006 Mercedes CLS-Class Owner's Manual - Page 82
2006 Mercedes CLS-Class Manual
Page 82 highlights
Safety and Security Occupant safety i For safety, make sure the hook 2 has attached to the ring 3 beyond the safety catch, as illustrated. Once the top tether anchorage hook is attached, the child restraint itself can be secured. Tighten the top tether strap according to the child restraint manufacturer's instructions. Child seat anchors - LATCH type This vehicle is equipped with two LATCH (Lower Anchors and Tethers for CHildren) type anchors (at each of the rear seats) for the installation of a "LATCH" child seat with the matching mounting fittings. The anchors are located behind an upholstery blend. Warning! G 1 Indicates the position of the anchors 2 Anchors Lift upholstery blend up to access the anchors. Install child seat according to the manufacturer's instructions. Children too big for a toddler restraint must ride in seats using regular seat belts. Position shoulder belt across chest and shoulder, not face or neck. A booster seat may be necessary to achieve proper belt positioning for children over 41 lbs until they reach a height where a lap/shoulder belt fits properly without a booster. Install child seat according to manufacturer's instructions. The child seat must be firmly attached in the right and left side anchors 1. An incorrectly mounted child seat may come loose during an accident which could result in serious injury or death to the child. Damaged or impact damaged child seats or child seat mounting fittings must be replaced. Do not leave children unattended in the vehicle, even if the children are secured in a child restraint system. i Non-LATCH type child seats may also be used and can be installed using the vehicle's seat belt system. Install child seat according to the manufacturer's instructions. 81