2006 Mercedes R-Class Owner's Manual - Page 326
2006 Mercedes R-Class Manual
Page 326 highlights
Controls in detail Useful features Reprogramming a single signal transmitter button To program a device using a signal transmitter button previously trained, follow these steps: Switch on the ignition ( page 38). Press and hold the desired signal transmitter button (2, 3 or 4). Do not release the button. The indicator lamp 1 will begin to flash after 20 seconds. Without releasing the signal transmitter button, proceed with programming starting with step 3. Operation of integrated remote control Switch on the ignition ( page 38). Select and press the appropriate integrated signal transmitter button (2, 3 or 4) to activate the remote controlled device. The integrated remote control transmitter continues to send the signal as long as the button is pressed - up to 20 seconds. Erasing the integrated remote control memory Switch on the ignition ( page 38). Simultaneously press and hold down the outer signal transmitter buttons 2 and 4, for approximately 20 seconds, until the indicator lamp 1 flashes rapidly. Do not hold for longer than 30 seconds. The codes of all three channels are erased. i If you sell your vehicle, erase the codes of all three channels. 325
![](/manual_guide/autos/2006-mercedes-rclass-owners-manual-25e42c8/326.png)