2006 Mercedes SL-Class Owner's Manual - Page 193

Controls in detail Power windows Opening and closing the windows The windows are opened and closed electrically. The switches for all the windows are on the driver's door. The switch for the passenger side windows is on the passenger door. The closing of the door windows can be immediately halted by releasing the switch or, if the switch was pulled past the resistance point and released, by either pressing or pulling the respective switch. The closing of the rear side windows can be immediately halted by releasing the switch. If a door window encounters an obstruction that blocks its path in a circumstance where you pulled the switch past the resistance point and released it to close the door window, the automatic reversal function will stop the door window and open it slightly. If the door window encounters an obstruction that blocks its path in a circumstance where you are closing the door window by pulling and holding the switch, by pressing and holding button ‹ on the SmartKey, by pressing and holding the lock button (vehicles with KEYLESS-GO*) on an outside door handle, by pressing and holding the retractable hardtop switch, or by pressing and holding button , on the climate control panel, the automatic reversal function will not operate. When leaving the vehicle, always remove the SmartKey or the SmartKey with KEYLESS-GO* from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment can cause an accident and/or serious personal injury. Switch on the ignition ( page 36). i Depending on the current position, the windows may also open or close when the air recirculation button , on the control panel of the automatic climate control ( page 187) is pressed and held. 1 Left door and rear side windows 2 Right door and rear side windows Warning! G When closing the windows, make sure that there is no danger of anyone being injured by the closing procedure. 192