2007 Mercedes GL-Class Owner's Manual - Page 529

Practical hints Flat tire Lowering the vehicle Lower vehicle by turning crank counterclockwise until vehicle is resting fully on its own weight. Remove the jack. Warning! G Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 110 lb-ft (150 Nm). Store jack and all other vehicle tool kit items back into the storage well. i The removed road wheel cannot be stored in the spare wheel well under the cargo compartment floor, but should be transported in the cargo compartment wrapped in a protective cover. 1-5 Wheel bolts Tighten the five wheel bolts evenly, following the diagonal sequence illustrated (1 to 5), until all bolts are tight. Observe a tightening torque of 110 lb-ft (150 Nm). Vehicles with TPMS or Advanced TPMS*: Do not activate the tire inflation pressure monitor until a full size wheel/tire with functioning sensor has been placed back into service on the vehicle. 528