2008 Mercedes SL-Class Owner's Manual - Page 95
2008 Mercedes SL-Class Manual
Page 95 highlights
Safety and Security Driving safety systems i When the ESP® is switched off and one or more drive wheels are spinning, the ABS/ESP® warning lamp v in the speedometer flashes. However, the ESP® will then not stabilize the vehicle. The switch is located in the lower part of the center console. Warning! G Electro-hydraulic brake system The electro-hydraulic brake system combines a hydraulic brake circuit with electronically controlled brake servo assistance. You have increased braking safety and improved braking comfort. Warning! When the ABS/ESP® warning lamp v is illuminated continuously, the ESP® is switched off or is not operational due to a malfunction. Vehicle stability in standard driving maneuvers reduces. Adapt your speed and driving to the prevailing road conditions and to the non-operating status of the ESP®. G ! Avoid spinning of a drive wheel for an extended period with the ESP® switched off. This may cause serious damage to the drivetrain which is not covered by the Mercedes-Benz Limited Warranty. 1 ESP® switch Press ESP® switch 1 until the ABS/ESP® warning lamp v in the instrument cluster comes on. The ESP is switched off. ® Never ignore a brake malfunction indicated in the speedometer display, for example by the ; (USA only) or 3 (Canada only) warning lamp. Refer to the "Practical hints" section ( page 345). Also read and observe the messages in the instrument cluster multifunction display ( page 377). Switching on the ESP® Press ESP® switch 1. The ABS/ESP® warning lamp v in the instrument cluster goes out. You are now again in normal driving mode with the ESP® switched on. 94