2010 Mercedes GLK-Class Owner's Manual - Page 89

Lighting Relevant information can be obtained at any authorized Mercedes-Benz Center. 87 Storing positions into memory X X Adjust the seats. On the driver's side, also adjust the steering wheel and exterior rear view mirrors to the desired positions. X Press memory button M once and within 3 seconds press memory position button 1, 2 or 3. When the settings are stored to the selected position, an acknowledgement signal sounds. Exterior lamp switch Recalling positions from memory X 1 W Standing lamps, left 2 X Standing lamps, right 3 $ Off Press and hold desired memory position button 1, 2 or 3 until the seat has moved to the stored position completely. On the driver's side, also wait for the steering wheel and exterior rear view mirrors to move to the stored position. Daytime running lamp mode 4 c Automatic headlamp mode Daytime running lamp mode 5 T Parking lamps (also tail lamps, i Releasing the memory position button stops movement to the stored positions immediately. Lighting Notes i If you drive in countries with left-hand driving, you must have the headlamps modified for symmetrical low beams. license plate lamps, side marker lamps and instrument panel lamps) 6 L Low-beam headlamps or high-beam headlamps 7 N Front fog lamps 8 R Rear fog lamp i The exterior lamps (except standing lamps or parking lamps) go out automatically when you remove the SmartKey from the starter switch or open the driver's door with the ignition switched off. Z Controls in detail i Vehicles equipped with active Bi-Xenon headlamps: The active Bi-Xenon headlamps increase usable illumination over conventional headlamps because they follow the curvature of the road ahead. The beams of the active Bi-Xenon headlamps shift to either side according to the vehicle's steering angle and speed.