2003 Mercury Marauder Owner's Manual - Page 54
2003 Mercury Marauder Manual
Page 54 highlights
Driver Controls 2. Hold down the MODE button for 5 seconds to enter zone mode. The display will read PRESS RESET TO SET ZONE XX where XX is the current zone. 3. Release the MODE button. 4. Repeatedly press and release the RESET button to scroll through the zones 1-15 until the desired zone is displayed. 5. Press the MODE button to save the new zone setting and return to the compass normal mode. Note: The compass exits the zone setting mode and returns to its previous setting after one minute of no activity. 3 2 4 5 1 15 14 13 12 6 7 8 9 1011 Note: If power is interrupted during the zone setting process, the compass resets to the same zone it was set to before the zone change process was started. Calibration mode To calibrate the compass: 1. Press and release the MODE button until the compass directional heading is displayed. 2. Hold down the MODE button for 10 seconds to enter the calibration mode. The display will read PRESS RESET TO DECAL. 3. Release the MODE button. 54