2003 Mercury Mountaineer Owner Guide 1st Printing (Spanish) - Page 372

Locks and Security If there is any potential remote keyless entry problem with your vehicle, ensure ALL remote entry transmitters are brought to the dealership, to aid in troubleshooting. Unlocking the doors 1. Press and release to unlock the driver's door. Note: The interior lamps will illuminate. 2. Press and release again within three seconds to unlock all the doors. The remote entry system activates the illuminated entry feature. This feature turns on the interior lamps for 25 seconds or until the ignition is turned to the ON position. If the dome lamp control is in the off position the illuminated entry feature will not work. The inside lights will not turn off if: • they have been turned on using the dimmer control or • any door is open. The battery saver feature will turn off the interior lamps 30 minutes after the ignition is turned to the OFF position. Locking the doors/liftgate 1. Press and release to lock all the doors and liftgate. The lamps will flash.Note: If any door, the liftgate, liftgate glass or hood (on vehicles equipped with perimeter anti-theft) are not closed properly, the lamps will not flash. and release again within three seconds to confirm that all the 2. Press doors are closed and locked. Note: the doors will lock again, the horn will chirp and the lamps flash once. Opening the liftgate window Press to unlatch the liftgate window. Sounding a panic alarm to activate the alarm. The horn will sound for a maximum of Press 30 seconds and the parklamps will flash for a maximum of 3 minutes. Press again or turn the ignition to ON to deactivate, or wait for the alarm to timeout in 3 minutes. Note: The panic alarm will only operate when the ignition is in the OFF or ACC position. 85