2006 Mercury Monterey Owner Guide 1st Printing - Page 51

Lights Replacing tail lamp/backup/turn lamp bulbs 1. Make sure the headlamp switch is in the OFF position and open the liftgate to expose the tail lamp assembly, then remove the retaining screws for the lamp assembly. 2. Carefully remove the lamp assembly. 3. Rotate bulb socket counterclockwise and remove from lamp assembly. 4. Pull bulb straight out of socket and push in new bulb. Install the new bulb(s) in reverse order. Replacing high-mount brakelamp bulbs For bulb replacement, see your authorized dealer. Replacing license plate lamp bulb The license plate bulbs are located in the license plate housing assembly on the liftgate. To change the license plate bulbs: 1. Make sure the headlamp switch is in the OFF position. 2. Remove the license lamp screw from the assembly. 3. Pull the lamp down and twist the bulb socket counterclockwise. Remove the bulb socket from the lamp. 4. Pull out the old bulb and push in the new bulb. 5. Install the bulb socket in the lamp assembly by turning it clockwise. 6. Install the lamp assembly and secure it with the retaining screw. 51 2006 Monterey (mty) Owners Guide (post-2002-fmt) USA (fus)