2007 Mercury Milan Owner's Manual - Page 104

Seating and Safety Restraints The BeltMinder feature uses information from the front passenger sensing system to determine if a front seat passenger is present and therefore potentially in need of a warning. To avoid activating the BeltMinder feature for objects placed in the front passenger seat, warnings will only be given to large front seat occupants as determined by the front passenger sensing system. Both the driver's and passenger's safety belt usages are monitored and either may activate the BeltMinder feature. The warnings are the same for the driver and the front passenger. If the BeltMinder warnings have expired (warnings for approximately 5 minutes) for one occupant (driver or front passenger), the other occupant can still activate the BeltMinder feature. If...The driver's and front passenger's safety belts are buckled before the ignition switch is turned to the ON position or less than 1-2 minutes have elapsed since the ignition switch has been turned ON...The driver's or front passenger's safety belt is not buckled when the vehicle has reached at least 3 mph (5 km/h) and 1-2 minutes have elapsed since the ignition switch has been turned to ON...Then...The BeltMinder feature will not activate. The BeltMinder feature is activated - the safety belt warning light illuminates and the warning chime sounds for 6 seconds every 30 seconds, repeating for approximately 5 minutes or until the safety belts are buckled. The driver's or front passenger's The BeltMinder feature is activated safety belt becomes unbuckled - the safety belt warning light for approximately 1 minute while illuminates and the warning chime the vehicle is traveling at least 3 sounds for 6 seconds every 30 mph (5 km/h) and more than 1-2 seconds, repeating for approximately minutes have elapsed since the 5 minutes or until the safety belts ignition switch has been turned are buckled. to ON... 104 2006 Milan (mln) Owners Guide (post-2002-fmt) USA (fus)