2007 Mercury Milan Owner's Manual - Page 43
2007 Mercury Milan Manual
Page 43 highlights
Lights 17. Reinstall splash shield access panel with screw (Passenger Side Only with ABS). 18. Reinstall Air Tube to the air filter assembly (Driver's Side Only). 19. Reinstall the vertical shield to the bolster. (Driver's side only). 20. Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, you should not need to align it again. Replacing front parking lamp/turn signal bulbs 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Reach over the front bolster. 3. Remove the vertical shield from the bolster by disengaging the S-shaped clip and rotate it up in a clockwise direction. (Driver's side only) 4. Remove the AirTube from the air filter assembly. (Driver's side only). 5. Remove screw from oval splash shield access panel from the exterior wheel well area. Lift up and rearward to release a hidden finger attachment at the lower portion of the panel (Passenger side only with ABS). 6. From the exterior wheel well area reach arm through splash shield opening to access bulb socket (Passenger side only with ABS). 43 2006 Milan (mln) Owners Guide (post-2002-fmt) USA (fus)