2009 Mercury Sable Scheduled Maintenance Guide 1st Printing - Page 15

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 7,500 miles ❑ Change engine oil and replace oil filter ❑ Rotate tires, inspect tires for wear and measure ❑ ❑ tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) RO#: DATE: DEALER VALIDATION: P&A CODE: MILEAGE: 15,000 miles ❑ Change engine oil and replace oil filter ❑ Replace cabin air filter (if equipped) ❑ Inspect steering linkage, ball joints, suspension tie rod ends, driveshaft, and U-joints (lubricate if equipped with Zerk fittings) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect automatic transmission fluid level (if equipped with an underhood dipstick) Inspect and lubricate 4x4 front axle U-joints Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) Normal Schedule Trucks, Fullsize Vans & SUVs DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: Scheduled Maintenance 15 2009 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide USA (fus)