1996 Nissan Pickup Owner's Manual - Page 112
1996 Nissan Pickup Manual
Page 112 highlights
4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. CAUTION ● As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. ● Wheel nut tightening torque: 87 to 108 ft-lb (118 to 147 N m) CE0116 vehicle has been run for 600 miles (1,000 km). 5. Securely store the flat tire and jacking equipment in the vehicle. WARNING ● Always make sure that the spare tire and jacking equipment are properly secured after use. Such items can become dangerous projectiles in an accident or sudden stop. ● The spare tire is designed for emergency use. See specific instructions under the heading ''Wheels and tires'' in the ''Do-it-yourself operations'' section. Installing wheel The spare tire is designed for emergency use. See specific instructions under the heading ''Wheels and tires'' in the ''Doit-yourself operations'' section. 1. Clean any mud or dirt from the surface between the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger tight. 3. With the wheel nut wrench, tighten wheel nuts alternately and evenly until they are tight. ● The wheel nuts must be kept tightened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each lubrication interval. ● Adjust tire pressure to the COLD pressure. COLD pressure: After vehicle has been parked for three hours or more or driven less than 1 mile (1.6 km). COLD tire pressures are shown on the tire placard affixed to the glove box lid. ● Retighten the wheel nuts when the 5-7