1996 Nissan Pickup Owner's Manual - Page 82

These instructions for starting the vehicle in N (Neutral) should only be used until service can be obtained. R (Reverse): Use this position to back up. Shift into this position only after the vehicle has completely stopped. N (Neutral): Neither forward nor reverse gear is engaged. The engine can be started in this position. You may shift to N and restart a stalled engine while the vehicle is moving. D (Drive): Use this position for all normal forward driving. 2 (Second gear): Use for hill climbing, effective engine braking on downhill grades or starting on slippery roads. Do not downshift into the 2 position at speeds over 62 MPH (100 km/h), and do not exceed 62 MPH (100 km/h) in the 2 position. ASD0701 Shifting with automatic transmission Push the button to shift into P, R or from D to 2. All other positions can be selected without pushing the button. P (Park): Use this selector position when the vehicle is parked or when starting the engine. Always be sure the vehicle is at a complete stop. For maximum safety, depress the brake pedal, then push in the selector lever button and move the lever to the P position. Apply the parking brake. When parking on a hill, apply the parking brake first, then shift the lever into the P position. Shifting from P (Park) If the ignition switch is in the ON position and the foot brake pedal is depressed, but the shift lever still cannot be moved out of P (Park) use the following procedure: 1. Shut the engine off and remove the key. 2. Apply the parking brake. 3. Reinsert the key and turn it clockwise to the ACC position. 4. Depress the brake pedal, move the shift lever to N (Neutral) and start the engine. 4-7