1996 Nissan Pickup Owner's Manual - Page 129
1996 Nissan Pickup Manual
Page 129 highlights
ENGINE OIL SDI0030 DI1163M DI1164M 7. Open and close the air release plug to release air. Then fill the radiator again and install the radiator cap. 8. Start the engine and warm it up until it reaches normal operating temperature. Then race the engine 2 or 3 times under no load. Watch the coolant temperature gauge for signs of overheating. 9. Stop the engine. After it completely cools down, refill the radiator up to the filler opening. Fill the reservoir tank up the MAX level. 10. Open and close the air release plug to release air. Then fill the radiator again and install the radiator cap. 11. Check the drain valve on the radiator and drain plug on the engine block for any sign of leakage. CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn off the engine. Wait a few minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Reinsert it all the way. 5. Remove the dipstick again and check the oil level. It should be between the H and 7-6