2005 Nissan Altima Owner's Manual - Page 258

5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. 6. Install the valve stem cap. 7. Check the pressure of all other tires, including the spare. Size Cold Tire Inflation Pressure High Speed/ Maximum Load Cold Tire Inflation Pressure 240 kPa, 35 PSI 240 kPa, 35 PSI 260 kPa, 38 PSI 240 kPa, 35 PSI 240 kPa, 35 PSI 260 kPa, 38 PSI N/A WDI0394 LDI0393 Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove the gauge. 4. Read the tire pressure on the gauge stem and compare to the specification shown on the Tire and Loading Information label. Front Original Tire P215/60/R16 94T 200 kPa, 29 PSI P215/55R17 93H P215/55R17 93V P225/45R18 91Y 230 kPa, 33 PSI 240 kPa, 35 PSI 200 kPa, 29 PSI 210 kPa, 30 PSI 240 kPa, 35 PSI 420 kPa, 60 PSI TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall. Rear Original Tire P215/60R16 94T P215/55R17 93H P215/55R17 93V P225/45R18 91Y Spare Tire T135/70R16 T135/90R16 T155/80R17 8-42 Maintenance and do-it-yourself