2005 Nissan Quest Owner's Manual - Page 137
2005 Nissan Quest Manual
Page 137 highlights
handle, the power assist feature will be activated and the door will complete its motion automatically. Power Open: The door automatically moves from the fully closed position to the fully open position in approximately 3 - 6 seconds. The power open feature can be activated by the switches on the keyfob, the overhead console and the door pillar. ● A sliding door can be opened by the overhead console switch and the keyfob even if the vehicle is locked. The door will individually unlock and open. When the sliding door is closed, it will remain unlocked. The vehicle must be re-locked to lock the door. ● The keyfob button must be held for 0.5 second before the door opens. ● The switch on the door pillar can only be used to open the door if the main ON/OFF switch is ON, the door is unlocked and the child lockout switch is not set. A warning chime will sound if the shift selector lever is moved out of P (Park) during a power open operation. The driver's side power sliding door cannot be power opened when the fuel lid door is open. A LPD0225 LPD0226 Door pillar switch Overhead console switch NOTE: To open, close or reverse a power sliding door, the ignition switch must be OFF, or, if the ignition switch is ON, the shift selector lever must be in P (Park). Also, the power sliding doors will not operate if battery voltage is low. Power Assist: If the main on/off switch is ON and a sliding door is unlocked and manually moved toward the open or close position using the inside or outside OPERATING THE POWER SLIDING DOOR (if so equipped) WARNING ● Make sure that all passengers have their hands, etc. inside the vehicle before closing the sliding doors. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents. Pre-driving checks and adjustments 3-7