2007 Nissan Pathfinder Owner's Manual - Page 183

pears in the display. Press the SEEK/TRACK button to adjust Bass and Treble to the desired level. You can also use the SEEK/TRACK button to adjust Fader and Balance modes. Fader adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speakers. Once you have adjusted the sound quality to the desired level, press the AUDIO button repeatedly until the radio or CD display reappears. Otherwise, the radio or CD display will automatically reappear after about 7 seconds. Clock set 1. Press and hold the MENU button until it beeps (for more than 2 seconds) to enter the clock set mode. 2. The hours will start flashing. Press the SEEK/TRACK button or to adjust the hours. 3. Press the MENU button until the radio beeps to switch to the minute adjustment. 4. The minutes will start flashing. Press the SEEK/TRACK button or to adjust the minutes. 5. Press the MENU button again to exit the clock set mode. The display will return to the regular clock display after 7 seconds, or press the MENU button again to return to the regular clock display. TUNE and SCAN are shown in the display window for each mode. No icon is displayed for SEEK tuning. SEEK tuning While in SEEK tuning mode, press the or for less SEEK/TRACK button than 1.5 seconds. SEEK tuning begins from low to high frequencies or high to low frequencies, depending on which button is pressed, and stops at the next broadcasting station. Press the button, once the highest broadcasting station is reached, the radio continues in the SEEK mode at the lowest broadcasting station. Press the button, once the lowest broadcasting station is reached, the radio continues in the SEEK mode at the highest broadcasting station. Manual tuning While in TUNE mode, press the SEEK/TRACK or for manual tuning. Press button and hold the SEEK/TRACK button or to move quickly through the channels. SCAN tuning While in SCAN tuning mode, press and hold the SEEK/TRACK button or for more than 1.5 seconds. FM/AM radio operation FM/AM band select: Pressing the BAND button will change the band as follows: AM ←→ FM When the BAND button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played. If a compact disc is playing when the BAND button is pressed, the compact disc will automatically be turned off and the last radio station played will come on. The FM stereo indicator, ST, illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. MENU button: Press the MENU button while the radio is playing to change the tuning mode as follows: SEEK tuning mode → TUNE mode → SCAN tuning mode Display screen, heater, air conditioner and audio systems 4-33