2009 Nissan Altima Owner's Manual - Page 46

4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. If you have any questions when installing a top tether strap child restraint on the rear seat, consult your NISSAN dealer for details. CHILD RESTRAINT INSTALLATION USING LATCH WARNING LRS0798 ● Inspect the lower anchors by inserting your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH anchors are obstructed. Front-facing Follow these steps to install a front-facing child restraint using LATCH system: First, secure the child restraint with the LATCH System (rear outboard seating positions only) or the seat belt, as applicable. 1 Flip up the anchor cover from the anchor point which is located directly behind the child seat. Position the top tether strap over the top of the seatback. Secure the tether strap to the tether anchor bracket that provides the straightest installation. ● Attach LATCH system compatible child restraints only at the locations shown. For the LATCH lower anchor locations see "LATCH (Lower Anchors and Tethers for CHildren) system". If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. ● The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses. 2 3 1-28 Safety-Seats, seat belts and supplemental restraint system