2010 Nissan GT-R Owner's Manual - Page 290
2010 Nissan GT-R Manual
Page 290 highlights
. Do not use oil or grease on the wheel studs or nuts. This could cause the nuts to become loose. Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km). COLD pressure: After the vehicle has been parked for three hours or more or driven less than 1 mile (1.6 km). COLD tire pressures are shown on the Tire and Loading Information label affixed to the driver's door opening. 10. Securely store the jacking equipment in the vehicle. . WARNING If the road wheels are hot, allow them to cool sufficiently before tightening the wheel nuts. Otherwise, the wheel nuts cannot be tightened to specification. 8. With the wheel nut wrench, tighten wheel nuts alternately and evenly in the sequence 1 2 3 4 5 as illustrated until they are tight. 9. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle completely. NOTE: . As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 97 ft-lb (132 N·m) The wheel nuts must be kept tightened to specification at all times. It is recommended that wheel nuts be tightened to specifications at each lubrication interval. . Adjust tire pressure to the COLD pressure. WARNING . Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. This could cause an accident. 8-42 Maintenance and do-it-yourself