2010 Nissan Titan King Cab Owner's Manual - Page 266

6. Move the shift selector to the N (Neutral) position while holding down the shift lock release. 7. For models without the NISSAN vehicle immobilizer system, turn the key to the ON position to unlock the steering wheel. 8. Now the vehicle may be moved to the desired location. If the shift selector cannot be moved out of P (Park), have a NISSAN dealer check the automatic transmission system as soon as possible. LSD0090 LSD0101 WARNING If the shift selector cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunctioning stop lights could cause an accident injuring yourself and others. Console shift Shift lock release If the battery is discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed. To move the shift selector, release the shift lock. The shift selector can be moved to N (Neutral). However, for models without the NISSAN vehicle immobilizer system, the steering wheel will be locked unless the ignition switch is turned to the ON position. This allows the vehicle to be moved if the battery is discharged. Column shift To push the shift lock release, complete the following procedure: 1. Turn the ignition key to the LOCK position and remove the key 2. Apply the parking brake. 3. On vehicles equipped with a column shifter, tilt the steering wheel down to the lowest position. 4. Remove the shift lock release cover as shown. 5. Insert a small screwdriver in the shift lock release slot and push down. Accelerator downshift - in D position - For passing or hill climbing, depress the accelerator pedal to the floor. This shifts the transmission down into a lower gear, depending on the vehicle speed. 5-18 Starting and driving