2014 Nissan Frontier King Cab Owner's Manual - Page 201

Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. 1. Press the defrost/defog button . Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. button to the OFF position. 1. Press the button will The indicator light on the go off. 2. Press the air flow control button. 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. ● To quickly remove ice or fog from the windows, turn the fan control dial to the highest setting and the temperature control to the full HOT position. position is selected, the air ● When the conditioner automatically turns on (the indibutton will come on) cator light on the if the outside temperature is more than 36°F (2°C). This dehumidifies the air which helps mode audefog the windshield. The tomatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. Heating and defogging This mode heats the interior and defogs the windshield. 1. Press the air flow control button. position is selected, the air ● When the conditioner automatically turns on (however, button will the indicator light on the not come on) if the outside temperature is air flow more than 36°F (2°C). If the control button is selected for more than one minute, the air conditioning system will continue to operate until the fan control dial is turned to OFF, the vehicle is shut off, or the A/C button is used to turn off the compressor even if the air flow control dial is turned to position. a position other than the This dehumidifies the air which helps defog mode automatithe windshield. The cally turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. 4-18 Monitor, climate, audio, phone and voice recognition systems