2014 Nissan Frontier King Cab Owner's Manual - Page 208

2. Turn the temperature dial to the left or right to set the desired temperature. Driver and passenger temperatures can be set independently. Press DUAL to activate dual climate control functions. Turn the passenger's side temperature control dial to the left or right to set the desired passenger's temperature. ● Adjust the temperature dial to about 75°F (24°C) for normal operation. ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution, fan speed and A/C on/off are also controlled automatically. ● A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically. ● Do not set the temperature lower than the outside air temperature. Otherwise, the system may not work properly. ● Not recommended if windows fog up. Dehumidified defrosting or defogging 1. Press the defroster control button to turn the system on. The indicator light in the button will illuminate. 2. Turn the temperature dial to the left or right to set the desired temperature. ● To quickly remove ice from the outside of the windows, turn the manual fan control to the maximum position. ● As soon as possible after the windshield is clean, press the AUTO button to return to the auto mode. control is activated, the air ● When the conditioner will automatically be turned on at outside temperatures above 36°F (2°C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the fan control is turned OFF, the vehicle is shut off or the A/C button is used to turn off the compressor even if an air flow is selected. This button other than dehumidifies the air which helps defog the windshield. The air recirculation mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. MANUAL OPERATION Fan speed control dial Turn the fan speed control dial left or right to manually control the fan speed or turn the system on or off. Press the AUTO button to return to automatic control of the fan speed. Heating (A/C OFF) The air conditioner does not activate. When you need to heat only, use this mode. 1. Press the A/C button. The A/C indicator will turn off. 2. Turn the temperature control dial to set the desired temperature. Monitor, climate, audio, phone and voice recognition systems 4-25