1997 Oldsmobile Aurora Owner's Manual - Page 140

Distance to Destination This feature acts as a reverse odometer by counting trip backward from an estimated distance which you enter before starting your trip. It also uses that information to determine the estimated time of arrival. Estimated Timeof Arrival (ETA) ETA is based on theaverage speed, the date and time of the day, and the estimated distance to your destination. After you have entered your distance to destination, press ETA to display estimated time of arrival, such as: ETA TUE 1256 PM Press ETA again to display the time to destination. The display will show the current time as the hours and minutes to destination, such as: To set, press DEST, then RESET and enter a maximum of four digits for the length of your trip. (Always use whole miles or kilometers.) Then press ENTER. The system will only accept the last fourdigits you enter as your distance todestination. The system will display the total distance to destination, such as: 1250 TIME TO DEST If the time to destination calculation is seven days or greater, the display will read: TRIP OVER 7 DAYS When the trip is complete a chime will sound and the display will show: TRIP COMPLETE The trip complete message will go off when you press any button, or when you turn your ignition off, then on. The display returns to the mode displayed prior to the interruption. 365 MI TO DEST or 587 KM TODEST When the system counts down to zerodistance remaining, even if you're in another display, a chime will sound and the display will show: TRIP COMPLETE The TRIP COMPLETE message will go off when you press any button, or when you turn your ignition to OFF, then on. The display returns to the mode displayed prior to the interruption. 2-84