2006 Polaris Sportsman X2 500 EFI Owners Manual - Page 50
2006 Polaris Sportsman X2 500 EFI Manual
Page 50 highlights
Instrument Cluster Rider Information Center FEATURES The rider information center is located in the instrument cluster. All segments will light up for 2.5 seconds at start-up. NOTE: If the instrument cluster fails to illuminate, a battery over-voltage may have occurred and the instrument cluster may have shut off to protect the cluster's electrical system. If this occurs, take the ATV to your Polaris dealer for proper diagnosis. 1. Gear Indicator - As the shift lever is moved, this indicates the gear the transmission is in: 4 5 6 3 H = High Range 7 L = Low Range N = Neutral R = Reverse 8 2 P = Park 2. AWD Indicator - This indicator illuminates when the electrical portion of the AWD system is enabled. 9 1 3. Engine Hour Display Indicator 4. Service Interval/Diagnostic Mode Indicator 5. Low Battery or Over Voltage - This warning usually indicates that the ATV is being operated at an RPM too low to keep the battery charged. A low battery warning may also occur under normal operation if the machine is at idle and high electrical load (lights, cooling fan, accessories) is applied. Driving at a higher RPM or connecting a battery charger will usually clear the warning. 6. Odometer/Tachometer/Tripmeter/ Hour Meter 7. Fuel Gauge - The segments of the fuel gauge show the level of fuel in the fuel tank. When the last segment clears, a low fuel warning is activated. All segments will flash, "FUEL" will display in the LCD, and the speedometer needle will blink. Refuel immediately. 8. Check Engine Warning Indicator - This indicator serves two purposes. The word HOT displays if the engine overheats. It also appears if an EFI-related fault occurs. Do not operate the ATV if this warning appears. Serious engine damage could result. 9. Mode Indicator 47