2008 Polaris Outlaw 450 S Owners Manual - Page 73
2008 Polaris Outlaw 450 S Manual
Page 73 highlights
Break-In Period Careful treatment of a new engine and transmission will result in more efficient performance and longer life for both. The break-in period for your new Polaris ATV is the first three hours of operation, or the time it takes to use 5-6 gallons (20 liters) of fuel. Do not allow engine speed to exceed 7000 RPM during the break-in period. Follow the break-in period with an additional 12 hours of cautious operation, with engine speed below 75% of capacity. No single action on your part is as important as following the procedures for a proper breakin. Perform the following break-in and maintenance procedures carefully. CAUTION Excessive heat build-up during the first three hours of operation will damage close-fitted engine parts. Do not allow engine speed to exceed 7000 RPM during the first three hours of use. Mixing brands or using a non-recommended oil may cause serious engine damage. Always use the recommended oil. Never substitute or mix oil brands. 70