2009 Polaris 600 Switchback Owners Manual - Page 108

2009 Polaris 600 Switchback Manual

Get 2009 Polaris 600 Switchback PDF manuals and user guides View all 2009 Polaris 600 Switchback manuals

Page 108 highlights

Clutch System Drive Belt Installation MAINTENANCE 1. Drop the drive belt over the drive clutch and pull back the slack. 2. To ensure satisfactory belt life, install belts so they operate in the same direction of rotation by positioning the identification numbers so that you can read them. If required, separate the sheaves as outlined in the belt removal procedures. 3. Rotate the L-wrench counterclockwise to tighten the sheaves while working the belt to the outer edge of the sheaves. 4. Remove the L-wrench and store it in the tool kit. 5. Reinstall the side panel. 6. Close and secure the hood. Torque Stop Periodically check torque stop clearance. With clutches in proper alignment, the torque stop clearance should be .010I.030I (.25-.75 mm) from the engine case. Adjust if necessary. Lock the jam nut. .010I-.030I (.25-.75 mm) 105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
105
MAINTENANCE
Clutch System
Drive Belt Installation
1.
Drop the drive belt over the
drive clutch and pull back the
slack.
2.
To ensure satisfactory belt
life, install belts so they oper-
ate in the same direction of
rotation by positioning the
identification numbers so
that you can read them. If
required, separate the
sheaves as outlined in the
belt removal procedures.
3.
Rotate the L-wrench counterclockwise to tighten the sheaves while
working the belt to the outer edge of the sheaves.
4.
Remove the L-wrench and store it in the tool kit.
5.
Reinstall the side panel.
6.
Close and secure the hood.
Torque Stop
Periodically check torque stop clearance.
With clutches in proper alignment, the
torque stop clearance should be .010
I
-
.030
I
(.25-.75 mm) from the engine case.
Adjust if necessary. Lock the jam nut.
.010
I
-.030
I
(.25-.75 mm)