2009 Polaris 600 Switchback Owners Manual - Page 34
2009 Polaris 600 Switchback Manual
Page 34 highlights
Instrumentation MFD Settings With the engine running, use the MFD Control Switch to set the MFD display to your preference. The rocker switch (+) has a MODE button (top) and a SET button (bottom). FEATURES + Standard vs. Metric The MFD will display either standard or metric units of measurement. While viewing a screen that displays measurements (MPH, KPH or temperatures), press and hold the MODE switch until the unit of measurement changes (about 10 seconds). Speedometer/Tachometer The speedometer and tachometer can be viewed in either the analog or the digital display. If the analog display is set to show speedometer readings, the digital screen will automatically display the tachometer (option 1). If the analog is set to show the tachometer, the digital screen will show the speedometer (option 2). To change preferences, press and hold the MODE button for three seconds. When the button is released, the new setting becomes active and screen colors change. See table below. Option 1 2 Analog Display Speed RPM Digital Display RPM Speed Analog Screen Blue "mph" Red "X100rpm" Digital Screen Blue Backlight Red Backlight 31