2010 Polaris Sportsman 550 Touring EPS Owners Manual - Page 50
2010 Polaris Sportsman 550 Touring EPS Manual
Page 50 highlights
FEATURES AND CONTROLS Instrument Cluster Rider Information Center Information Display Area Programmable Service Interval When the hours of engine operation equal the programmed service interval setting, the wrench icon will flash for 5 seconds each time the engine is started. When this feature is enabled, it provides a convenient reminder to perform routine maintenance. The service interval is programmed at 50 hours at the factory. Use the following procedure to change the service interval. 1. Press the SELECT button until remaining service hours display. 2. Press and hold the MODE button. 3. When the service hours flash, press and release the SELECT button to advance the hours to the desired setting (including OFF). When the digits stop flashing, the interval has been set. Clock Mode Use one of the following two methods to reset the clock. Method 1 1. Select the Hour Meter Mode. 2. Press and hold the mode button on the instrument cluster until the hour display flashes. Release the button. 3. Press and release the SELECT button to advance the hours. 4. After the hours are set, press and release the MODE button to move to the minutes. Use the same procedure to reset the minutes. 5. When the digits stop flashing the clock has been set. Method 2 1. With the key turned off, press and hold the MODE button. 2. While still holding the MODE button, turn the key to the ON position. 3. Continue to hold the MODE button until the hour display flashes. Release the button. 4. Set the time as outlined in steps 3-5 of Method 1. 46