2013 Polaris 600 INDY Owners Manual - Page 114
2013 Polaris 600 INDY Manual
Page 114 highlights
TROUBLESHOOTING Engine Troubleshooting Problem Noise in drive system Probable Cause Solution Broken drive clutch components Bearing failure/ chaincase, jackshaft, or front drive shaft Drive belt surface flat spots Drive chain loose Drive chain worn, sprocket teeth broken • SEE YOUR DEALER. • SEE YOUR DEALER. • Inspect and replace as needed. • Inspect and adjust (or replace). • SEE YOUR DEALER. Poor low RPM performance Worn drive belt Excessive belt/ sheave clearance Sticky clutch Poor fuel quality • Inspect and replace as needed. • SEE YOUR DEALER. • SEE YOUR DEALER. • Use 87-91 octane fuel (or higher). • SEE YOUR DEALER. Seizure is a result of poor lubrication, inadequate fuel supply, broken parts or improper cooling. • Fuel may have entered the crankcase while the vehicle was standing or being transported. SEE YOUR DEALER to correct the cause. Drain plug(s) are located on the lower crankcase for emergency draining. Engine doesn't turn Seized engine Hydrostatic lock 110