2013 Polaris 600 INDY Owners Manual - Page 42
2013 Polaris 600 INDY Manual
Page 42 highlights
FEATURES Instrument Cluster Rider Information Center Security System (Ignition Lock System) First Time Use of Your Security System TASK 3: Unlock the System 1. When the engine is running, the display will alternate between SECURE ON and ENTER. Wait until ENTER displays, then press and release SET to advance the digit. When "0" is displayed, press and release MODE to accept the digit. 2. Press and release SET to advance the second digit. When "0" is displayed, press and release MODE to accept the digit. 3. Press and release SET to advance the third digit. When "0" is displayed, press and release MODE to accept the digit. 4. After accepting the third digit, view the display screen. SECURE OFF displays if the system unlocks. NOTE: The system is now unlocked. 5. You must now enter a new security code. Proceed immediately to TASK 4. TASK 4: Enter Your New Security Code 1. Immediately after locking and unlocking the system, and while SECURE OFF is displayed, press and release the MODE button to bring up the ENTER screen. 2. When ENTER displays, use the SET and MODE buttons to select and accept each digit of a new personal security code. 3. After accepting the third digit, view the display screen. CODE SET will display if the system accepted your new code. You will not see this display again. NOTE: Your new code is now set. The system is NOT locked. 4. Record your new security code in a safe place for future reference. Record your new personal security code here: _____ TIP: If you lose your personal security code, see your dealer to have the code reset to "000". Then perform TASK 2 through TASK 4 to change the code to one of your own choosing. 38