2014 Polaris 600 Switchback Owners Manual - Page 45
2014 Polaris 600 Switchback Manual
Page 45 highlights
FEATURES Instrument Cluster Rider Information Center Diagnostic Display Mode The diagnostic display mode is for informational purposes only. Please see your POLARIS dealer for all major repairs. The diagnostic mode is accessible only when the check engine warning indicator is illuminated and a diagnostic code is active. Do not stop the engine if you want to view the active code (failure code). Active codes cannot be retrieved if power is interrupted to the instrument cluster. The codes will become inactive codes if power is interrupted. Inactive codes are stored in the history of the unit. Please see your POLARIS dealer to retrieve inactive codes. Use the following procedure to view active codes. 1. Do not stop the engine. 2. With the brake engaged, press and release the SELECT button or SET switch to toggle to the diagnostic display mode. When a code is active, the diagnostic display mode will appear immediately following the engine hour display. TIP: When the diagnostic mode is displayed, the check engine warning indicator will begin to flash. 3. A set of two numbers will appear in the display. • The 2-6 digit suspect parameter number (SPN) in the information display area indicates which component is generating the fault code. • The 1-2 digit failure mode indicator (FMI) number in the odometer area indicates the fault mode, such as open or short circuit. 4. More than one fault may be active. Press and hold the MODE button or MODE switch for two seconds to toggle to the next active code. Repeat until all codes are retrieved. 5. See page 44 for code definitions and failure descriptions. 43