2014 Polaris 600 Switchback Owners Manual - Page 58

2014 Polaris 600 Switchback Manual

Get 2014 Polaris 600 Switchback PDF manuals and user guides View all 2014 Polaris 600 Switchback manuals

Page 58 highlights

THE PERFECT FIT Handlebar Adjustments Handlebar Position 1. Loosen the four bolts on the bottom of the adjuster block. If necessary, pry the blocks apart with a screwdriver. 2. Adjust the handlebar forward or rearward to the desired position. 3. Tighten the bolts. Torque the bolts to 13-16 ft. lbs. (18-22 Nm). Loosen top bolts to adjust handlebar angle Handlebar Angle 1. Loosen the four bolts on the top of the adjuster block. If necessary, pry Loosen bottom bolts to the blocks apart with a adjust handlebar position screwdriver. 2. Adjust the handlebar forward or rearward to the desired angle. Be sure handlebars, brake lever and throttle lever operate smoothly and do not hit the gas tank, windshield or any other part of the machine when turned fully to the left or right. If necessary, loosen the set screws for the left and right controls, rotate the controls slightly, then tighten the set screws to the proper torque. NOTICE: Do not stretch wires while adjusting the controls. Stretching the wires could damage the handwarmers. • Right control torque: 27 in. lbs. (3.05 Nm) +/- 10%. • Left control torque: 24 in. lbs. (2.7 Nm) +/- 10%. 3. Tighten the bolts. Torque the bolts to 13-16 ft. lbs. (18-22 Nm). 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
56
THE PERFECT FIT
Handlebar Adjustments
Handlebar Position
1.
Loosen the four bolts on
the bottom of the adjuster
block. If necessary, pry
the blocks apart with a
screwdriver.
2.
Adjust the handlebar for-
ward or rearward to the
desired position.
3.
Tighten the bolts. Torque
the bolts to 13-16 ft. lbs.
(18-22 Nm).
Handlebar Angle
1.
Loosen the four bolts on
the top of the adjuster
block. If necessary, pry
the blocks apart with a
screwdriver.
2.
Adjust the handlebar forward or rearward to the desired angle. Be
sure handlebars, brake lever and throttle lever operate smoothly and
do not hit the gas tank, windshield or any other part of the machine
when turned fully to the left or right. If necessary, loosen the set
screws for the left and right controls, rotate the controls
slightly
,
then tighten the set screws to the proper torque.
NOTICE:
Do not stretch wires while adjusting the controls. Stretching the wires
could damage the handwarmers.
±
Right control torque: 27 in. lbs. (3.05 Nm) +/- 10%.
±
Left control torque:
24 in. lbs. (2.7 Nm) +/- 10%.
3.
Tighten the bolts. Torque the bolts to 13-16 ft. lbs. (18-22 Nm).
Loosen top bolts to adjust
handlebar angle
Loosen bottom bolts to
adjust handlebar position