2014 Polaris RZR 170 Owners Manual - Page 66
2014 Polaris RZR 170 Manual
Page 66 highlights
MAINTENANCE Parking Brake Cable Freeplay Adjustment 1. Inspect and perform any needed service on the brake pads before adjusting parking brake cable freeplay. 2. Make sure the parking brake is NOT set (lever is DOWN). 3. Pull the brake cable back to inspect freeplay between the cable end and the caliper bracket. Freeplay should be 1/16" - 1/8" (1.5-3 mm). 4. To adjust freeplay, loosen the jam nut. Turn the in-line adjuster nut outward to decrease freeplay. Turn the adjuster nut inward to increase freeplay. Jam In-line Inspect 5. Tighten the jam nut Nut Adjuster Nut Freeplay against the adjuster nut. Parking Brake Adjustment 1. Inspect and perform any needed service on the brake pads before adjusting the parking brake. 2. Position the vehicle on a level surface. Place the transmission in neutral. 3. Carefully elevate the rear of the vehicle slightly. Use an appropriate lift. 4. Loosen the jam nut on the parking brake adjustment bolt. 5. While rotating the rear wheels by hand, tighten the adjustment bolt until significant brake drag is detected. Then back the adjustment bolt out 1/4 turn. 6. Hold the adjustment bolt in place and tighten the jam nut securely Adjustment Bolt Jam Nut against the lever arm. 7. Check parking brake lever movement. Verify that the rear wheels rotate freely with the parking brake off (lever in DOWN position) and that the vehicle will not move when the parking brake is applied (lever in UP position). 8. Verify that the park brake lever stays in the UP position when the brake is fully applied. 64