2014 Polaris RZR 170 Owners Manual - Page 97
2014 Polaris RZR 170 Manual
Page 97 highlights
TROUBLESHOOTING Drive Belt Wear/Burn Possible Cause Driving at low RPM or ground speed Insufficient warm-up at low ambient temperatures Solution Drive at a higher speed. Warm the engine at least 5 minutes. With the transmission in neutral, apply small amount of throttle in short bursts, 5 to 7 times. The belt will become more flexible and prevent belt burning. Slow/easy clutch engage- Use the throttle quickly and effectively. ment Belt slippage from water or snow ingestion into the CVT system Clutch malfunction Poor engine performance Wrong or missing belt Improper break-in Dry out the CVT (see page 66). Prevent water from entering the CVT inlet and outlet ducts (see page 86). Inspect clutch seals for damage if repeated leaking occurs. See your POLARIS dealer. Check for fouled plugs or foreign material in gas tank or fuel lines. See your dealer. Install the recommended belt. Always break in a new belt and/or clutch. See page 36. 95