2015 Polaris Sportsman Touring 850 SP Owners Manual - Page 135
2015 Polaris Sportsman Touring 850 SP Manual
Page 135 highlights
MAINTENANCE Cleaning and Storage Storage Tips Fog the Engine 1. After stabilizing the fuel, remove the spark plug and add 2-3 tablespoons of engine oil. To access the plug hole, use a section of clear 1/4" hose and a small plastic squeeze bottle filled with the premeasured amount of oil. 2. Reinstall the spark plug. Torque to specification. 3. Apply dielectric grease to the inside of each spark plug cap and reinstall the caps onto the plugs. 4. Turn the engine over several times using electric start. Oil will be forced in and around the piston rings and ring lands, coating the cylinder with a protective film of fresh oil. 5. If POLARIS fuel system additive is not used, the fuel tank, fuel lines, and injectors should be completely drained of gasoline. Inspect and Lubricate Inspect all cables and lubricate all areas of the vehicle as recommended in the Periodic Maintenance Chart beginning on page 88. Battery Storage See pages 124-125 for storage and charging procedures. Store the battery in a cool, dry place. Storage Area/Covers Set the tire pressure and safely support the ATV with the tires slightly off the ground. Be sure the storage area is well ventilated. Cover the vehicle with a genuine POLARIS cover. Do not use plastic or coated materials. They do not allow enough ventilation to prevent condensation, and may promote corrosion and oxidation. 133