1998 Pontiac Sunfire Owner's Manual - Page 104

Turn and Lane Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. If a bulb is burned out, replace it tu help avoid an accident. If the arrows don't go on at all when you signal a turn, check the fuse (see "Fuses and Circuit Breakers" in the Index) and for burned-out bulbs. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically. An arrow on the instrument panel will flash in the direction of the turn or lane change. Headlamp HigldLow Beam Changer To change the headlamps from low beam to high or high b'eamto low, pull the turn signal lever all the way toward you. Then release it. When the high beams are on, this light on the instrument panel will also be on. To signal a lane change, just raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release i.t. As you signal a turn or a lane change, if the arrows flash rapidly, asignal bulb may be burned out and other drivers won't see your turn signal. Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. To use it, pull the turn signaVmultifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off. 244