2004 Pontiac GTO Owner's Manual - Page 108
2004 Pontiac GTO Manual
Page 108 highlights
Setting Cruise Control 3. Get up to the speed you want. 4. Rotate the lever down to the SET-DECEL position. The cruise control symbol along with the CRUISE ACTIVE message appears on the display. 5. Take your foot off the accelerator pedal and release the cruise control lever. {CAUTION: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. The cruise control lever is on the left side of the steering column. The ON-OFF/CANCEL switch is at the end of the lever and is activated by pushing in towards the direction of the steering column. To set cruise control, do the following: 1. Turn on the ignition. 2. Press the ON-OFF/CANCEL switch. The cruise control symbol along with the Cruise Enabled message appears on the trip computer display. Increasing Speed While Using Cruise Control You may do one of the following: • Turn the lever down to the SET-DECEL position until the car slows down to the desired speed, then release it. • Turn the lever up to the RES-ACCEL position until the car accelerates up to the desired speed, then release it. Minor changes in speed can be achieved by momentarily turning the lever up or down. When reducing speed, remember that the cruise control is not designed to operate under 25 mph (40 km/h). 3-10