2004 Pontiac GTO Owner's Manual - Page 93

Entering Programming Mode The vehicle programming mode is accessed through the Options Menu. To access the Options Menu, do the following: 1. When the vehicle is stationary, hold down the MODE button while turning the ignition from LOCK to ON. R Q (Programming Mode Selection): When the Options Menu is displayed, use the trip computer up or down arrows to enter the programming mode. There are help screens available to assist you in understanding the feature that you are adjusting. If a menu item is selected and the screen is left for more than five seconds, a help screen displays to inform you how to operate the selected feature. Navigating the Menu To scroll through the different personalization features, press the MODE button. To change the setting, use the up or down arrows. To continue, press the MODE button. The following information shows how to reset or customize features after entering the main menu: RESTORE TO FACTORY SETTINGS 2. When the vehicle has been started, the system check completed and the vehicle speed is less than 6 mph (10 km/h), then the Options Menu is displayed for three seconds. If the vehicle speed exceeds 6 mph (10 km/h), the Options Menu disappears and the display reverts back to the previous trip computer function. The programming mode is not accessible if an alarm warning has been activated or a warning symbol on the instrument panel has been triggered. This option restores the instrument panel, audio system and other general vehicle systems to the factory default settings. Use the up or down arrows to select Yes or No. Press the MODE button to continue. If Yes is selected, the next feature will be displayed after a two second delay. This delay is to allow time for the default parameters to be set. 2-33