2004 Pontiac GTO Owner's Manual - Page 137

Altering Overspeed Presets The default overspeed settings can be changed for your individual preference. The car must be standing still when changing a preset. Ensure the preset you wish to change is showing. Then briefly press the SET button. The display starts to flash. Use the up or down arrows to adjust the setting. When correct, briefly press the SET button. Each PRESET can be changed in this way. The presets are automatically arranged in ascending order. One or more presets can be assigned to OFF, by reducing the preset down to 0 (OFF). When driving you then only have three or less presets to choose from. To turn back on, select the OFF preset (when the vehicle is standing still) and use the up arrow to increase the number. If the up or down arrows are briefly pressed while driving, the overspeed setting is changed to the speed at which you are travelling. If the SET button is pressed for two seconds, either while driving or standing still, overspeed is turned completely off or on. Stop Watch The stop watch function, when enabled, records elapsed time. It can be used, for example, to measure the time taken to travel between two points on a trip. To start/stop the stop watch, press SET to reset it, then press and hold MODE for more than three seconds. The trip computer must be on Trip Time for this function to work. DIGITAL SPEEDO If digital speedo mode is activated, the mph (km/h) are shown in a large digital mode. Rest Reminder This feature alerts you when you may have been travelling for too long without a break. After the ignition is turned on, a timer will start, and after two hours of continuous driving, the trip computer automatically shows the rest reminder display. The default on this feature is off. 3-39