2006 Pontiac GTO Owner's Manual - Page 237

3. Remove the wiring harness connector by squeezing the two tabs on the connector and pulling the connector down. 4. Remove the old bulb by twisting the bulb counterclockwise. Front Turn Signal and Parking Lamps To replace this bulb, do the following: 1. Open the hood. See Hood Release on page 5-11 for more information. 2. Follow the removal procedure for either the driver's side or passenger's side of the vehicle to access the bulbs. See Headlamps on page 5-45 for more information. 3. Disconnect the wiring harness connector from the bulb assembly. 4. Turn the bulb socket counterclockwise and remove. 5. Lightly press the bulb and twist counterclockwise out of the bulb socket. 6. Insert the new bulb into the bulb socket. 7. Reverse the steps to reinstall the lamp assemblies. 5. Install the new bulb. Take care not to touch the bulb. 6. Reverse the steps to reinstall the headlamp assembly. 5-47