2006 Pontiac GTO Owner's Manual - Page 84

Parking Brake Shifting Into Park (P) (Automatic Transmission) {CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your vehicle will not move, even when you are on fairly level ground, use the steps that follow. If you are pulling a trailer, see Towing a Trailer on page 4-34. 1. Hold the brake pedal down with your right foot and set the parking brake. 2. Move the shift lever into PARK (P). • Press in and hold the shift lever button, located on the top of the shift lever. • Push the lever all the way toward the front of the vehicle. 3. Turn the main key to LOCK. 4. Remove the key and take it with you. If you can leave your vehicle with the main key in your hand, your vehicle is in PARK (P). To set the parking brake, pull up on the parking brake handle without pressing the release button. If the ignition is on, the brake system warning light will come on. See Brake System Warning Light on page 3-27. To release the parking brake, hold the regular brake pedal down. Pull the parking brake handle up until you can press the release button. Hold the release button in as you move the brake handle all the way down. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Verify that the parking brake is fully released and the brake warning light is off before driving. 2-24