2006 Pontiac Vibe Owner's Manual - Page 348
2006 Pontiac Vibe Manual
Page 348 highlights
At Least Twice a Year Restraint System Check Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced. Also look for any opened or broken airbag coverings, and have them repaired or replaced. (The airbag system does not need regular maintenance.) Fluid Level Check Check the power steering pump, rear axle, transfer case, and automatic or manual transaxle fluid levels and add as needed. See Power Steering Fluid on page 5-35 and Automatic Transaxle Fluid on page 5-21 or Manual Transaxle Fluid on page 5-24. Check for leaks. A fluid loss in these systems could indicate a problem. Have the system inspected and repaired at once. At Least Once a Year Key Lock Cylinders Service Lubricate the key lock cylinders with the lubricant specified in Part D. Wiper Blade Check Inspect wiper blades for wear or cracking. Replace blade inserts that appear worn or damaged or that streak or miss areas of the windshield. Also see Windshield, Backglass, and Wiper Blades on page 5-86. Seat Operation Check Make sure the head restraints stay in position and all seat latches lock. Check that the recliner holds by pushing and pulling the seatback while it is reclined. Weatherstrip Lubrication Silicone grease on weatherstrips will make them last longer, seal better, and not stick or squeak. Apply silicone grease with a clean cloth. During very cold, damp weather more frequent application may be required. See Part D: Recommended Fluids and Lubricants on page 6-19. Body Lubrication Service Lubricate all hood latch assembly, secondary latch, pivots, spring anchor, release pawl, hood and body door hinges, rear compartment, and any folding seat hardware. Part D tells you what to use. More frequent lubrication may be required when exposed to a corrosive environment. 6-14