2008 Pontiac Vibe Owner's Manual - Page 276

{CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, you can use a cloth or a paper towel to do this; but be sure to use a scraper or wire brush later, if needed, to get all the rust or dirt off. See Changing a Flat Tire on page 5-70. When rotating your vehicle's tires, always use the correct rotation pattern shown here. Tires should only be moved from front to rear and rear to front on the same side of the vehicle. Do not include the compact spare tire in the tire rotation. After the tires have been rotated, adjust the front and rear inflation pressures to the amounts shown on the Tire and Loading Information label. See Inflation - Tire Pressure on page 5-55 and Loading Your Vehicle on page 4-19. Vehicles with a tire pressure monitoring system will need to reset (initialize) the system after each tire rotation. See Tire Pressure Monitor System on page 5-57. Make certain that all wheel nuts are properly tightened. See "Wheel Nut Torque" under Capacities and Specifications on page 5-95. 5-62